How To Reset Zmodo Camera Zh-ixu1f-w

Zmodo has a new setup method called 'Zink' for smart WiFi devices. If you accept purchased your product recently, it may have been updated with a newer firmware that is compatible with the 'Zink' setup process. If you have one of the post-obit products, your device may be uniform with 'Zink':

one) Pivot (ZM-SH86B001-WA)

two) Greet (ZM-SHD003B)

iii) Smart WiFi Doorbell (ZM-CJAED)

four) Mini WiFi Camera (ZM-SH75D001-WA)

v) PT Camera (ZH-IZV15-WAC)

six) WiFi Camera Kits (ZM-W0002, ZM-W003, ZM-W0004, etc.)

vii) NVR kits with WiFi cameras

eight) Axle (ZM-SHRZ01W)

If your quick guide instructs you to use 'Zink' delight follow these instructions to gear up upwardly your WiFi device. If your quick guide instructs y'all to use SmartLink, please skip to the "Using SmartLink" section to fix upward your device using SmartLink.

Y'all may also view our Zink video tutorial for guidance on the setup.

Annotation: If you already have a Axle installed, you volition be able to set upwards your device using the "Automatic Connectedness" setup method. "Automatic Connection" uses your Beam to connect all of your 'Zink'-compatible WiFi devices in a few easy steps.

Using Zink:

1) Before yous begin:

Make sure you have read the minimum requirements for your product. If you lot are connecting a Greet, Torch Pro, or a Smart Doorbell, you will need to complete the installation steps before configuring your production.

2) Download the free app and create a free account.

Download and open the complimentary 'Zmodo' app from Google Play or the App Shop and sign up for a free Zmodo account. You can create an business relationship using a valid email address (shown below) or a phone number.

If you already have a Zmodo account, please log in.

3) Open the (+) Add Device menu and start the 'Zink' Setup Process.

Once you've logged into your business relationship, you lot volition be taken to your Device List home screen. Open the Add Device "+" menu on the upper correct-paw corner and select the 'Zink' setup method. If y'all practise not accept a Beam already, select the 'Normal' setup option.

four) Connect to your phone to your WiFi device's wireless signal.

Your will exist prompted to connect to your device's WiFi indicate. Press "Tap hither to select WiFi" to go to your smartphone'south WiFi settings folio, and select your device's WiFi signal. If you're connecting a Beam, connect to the SSID called "AP_ZMD". If you're connecting any other 'Zink' WiFi device, connect to the SSID chosen 'ZMD_SAP'.

5) Enter your WiFi information into the respective fields.

Enter the WiFi information (SSID and password) for the WiFi network that you desire your device to connect to. Please notation that you need a2.4GHz WPA/WPA2 password-protected WiFi network, and that your network proper noun (SSID) mustNoninclude spaces, and it mustNOT be hidden. For example, "My Router" will notwork, only "My_Router"willwork.

You can admission your router's settings to change your SSID.

'Zink' volition automatically discover and connect your device. The app may prompt you to connect to your WiFi network. If it does, please select "Tap here to select WiFi" and connect y'all smartphone to your WiFi network. Once connected, you can render to the Zmodo app until your device is connected.

6) Name your device.

In one case your Zmodo device is successfully connected, you will exist prompted to name your device and set the timezone. You can select a unique name, or y'all can name it after its location or function. Information technology is recommended that y'all set a device password for security. It volition then enquire you whether yous want to share your device or not. One time these steps are completed, your Zmodo wireless device will be ready for utilize!

Using SmartLink:

1) Before you brainstorm:

Make sure you have read the minimum requirements and accept successfully completed the installation portion of this support page. Connect your Android or iOS smartphone to the WiFi network that y'all desire to connect to your Zmodo wireless device (must be ii.4GHz).

2) Download the complimentary app and create a free account.

Download and open the free 'Zmodo' app from Google Play or the App Store and sign up for a free Zmodo account. Yous can create an business relationship using a valid electronic mail address (shown beneath) or a phone number.

If you already accept a Zmodo account, please log in.

iii) Select the (+) Add Device option.

Once you've logged into your business relationship, you will be taken to your Device Listing abode screen. Select the Add together Device "+" choice on the upper correct-manus corner. A few in-app instructions volition assist guide you to ready your Zmodo wireless device for network configuration.

Add Device

four) Enter your WiFi countersign.

Power on your device(s) and select the number of devices that you are going to configure. Y'all will be prompted to enter the password for the WiFi network that your phone is connected to. This volition exist the WiFi network that your Zmodo device will connect to. For your convenience, please make sure that you enter your password carefully and correctly (case-sensitive). Please allow a few minutes for SmartLink to automatically discover and connect your device to the WiFi network.

SmartLink Process

5) Proper name your device.

Once SmartLink has successfully continued your Zmodo device, you will be prompted to name your device and set up the timezone. Yous can select a unique proper name, or you can proper noun information technology afterwards its location or function. Information technology is recommended that you set a device password for security. Information technology will then ask y'all whether you desire to share your device or not. Once these steps are completed, your Zmodo wireless device will be ready for apply!

Device Naming

Common Troubleshooting Tips

If your device isn't connecting to the wireless network, you lot may be encountering some mutual and resolvable issues. Delight try one of the following if you are having trouble connecting your device:

1) You may have entered your WiFi countersign incorrectly. Please reset your device. Wait for information technology to power dorsum on, and retry the setup procedure in one case the LED is blinking green.

2) Your wireless signal may be too weak. In lodge to improve your wireless point, delight refer to the FAQ on improving wireless indicate strength.

3) Still having problem? Contact our friendly support team at support@zmodo.com.